How to Choose a Color Laser Printer with Dual Trays
Choose a color laser printer with dual trays when your office switches between paper stocks often. Compare tray capacity, manual-feed handling, duplex printing, wireless access and the space needed to keep both trays usable.
On this page (7 sections)
- What should you check in a color laser printer dual tray setup?
- How does tray capacity affect office workflow?
- Do you need color, or would monochrome be enough?
- How important are duplex printing and wireless access?
- What office equipment should sit near the printer?
- How should you set up and maintain two paper inputs?
- Is a color laser printer with dual trays worth it?
A color laser printer with dual trays suits offices that switch between paper stocks often, but the key detail is how the trays are built and selected. Compare standard tray capacity, paper-size support, automatic switching, manual-feed handling and the space needed to access both trays.
A dual-tray setup can keep everyday letter paper loaded while a second tray holds another size or stock. That saves handling time when your office prints forms, notices, envelopes or heavier sheets during the same workday.
The benefit is practical rather than cosmetic. Staff do not need to unload one stack to load another between jobs.
That matters most for small teams where one person may print invoices, then labels or mailing sheets, then plain office copies in quick succession.
It also helps keep work organized by paper type. Reports stay on the standard stock, while special sheets remain ready in the second input.
This reduces mix-ups, especially when several people share the same printer.
Size still needs planning. Two inputs are only useful if both trays can be opened, adjusted and refilled without moving the machine.
Check clearance at the front, sides and back before you commit to a spot on a desk or cabinet.
Think about frequency before you buy. Daily switching justifies two loaded trays, while occasional special media may suit a single tray with a manual slot.
Your normal weekly pattern should guide the choice, not a peak week or a one-time project.
What should you check in a color laser printer dual tray setup?
Start with the type of second paper input, because not every two-input design works the same way. Some printers have two standard cassettes, while others combine one main tray with a multipurpose or manual feed slot.
Check these details before comparing speed or wireless features:
- The number of standard trays
- The paper sizes supported by each tray
- Whether the printer selects the correct tray automatically
- The capacity of each tray
- Whether the second input accepts envelopes or cardstock
- Whether duplex printing works with your chosen paper
- The space needed to open, refill and adjust each tray
A manual feed slot can be useful for special paper, but it may require more attention than a dedicated second cassette. If several people print different documents, automatic tray selection can matter more than a high maximum speed.
Two standard cassettes usually suit offices that use two stocks every day. Each tray can stay loaded, labeled and set in the driver, so users simply choose the right source for each job.
A main tray plus a manual slot suits a different pattern. Everyday paper stays in the cassette, while cardstock, envelopes or labels go through the slot when needed.
This takes more care, but it can keep the footprint smaller.
Capacity deserves close attention. A second tray with very limited room may empty quickly during busy periods.
That creates the same interruptions you hoped to avoid, even though the printer technically has two inputs.
Paper guides and media settings also matter. Each tray should hold the stock flat and firmly, without gaps or excess pressure.
The driver setting should match the loaded size and type, or sheets may feed at the wrong speed or exit with poor results.
Duplex support should be checked by paper type, not assumed. Some stocks work well for two-sided printing, while heavier or coated sheets may need a different path.
Confirm what the manual allows before you plan double-sided work on special media.
For a broader look at printers, scanners and other office equipment, see our desktop printers guide.
How does tray capacity affect office workflow?
Tray capacity affects how often you stop to reload paper. A larger main tray helps with routine documents, while a second tray reduces switching between paper types.
Think about your busiest normal day rather than an occasional large print job. For a small business, compare color laser printers for small business against that routine.
If your office prints mostly standard documents with a few special sheets, one large tray and a flexible second input may be enough.
If you regularly use two paper sizes, two standard trays can be easier to manage. Label each tray clearly and match the printer driver settings to the paper loaded in that location.
Paper capacity is only useful when the tray remains accessible. Leave enough room to pull it out fully, adjust the guides and remove a misfed sheet without moving the printer.
What paper should go in each tray?
Keep your most common stock in the easiest tray to reach. Put the less frequent stock in the second tray, unless the printer gives you a clear reason to reverse that arrangement.
Use the correct paper setting in the print dialog. A heavier stock may need a different media selection, slower handling or a manual feed path, depending on the printer's instructions.
For label work, compare the printer's supported media path with the label material you plan to use. Our guide to the best color laser printers for labels can help you examine that use case separately.
Do you need color, or would monochrome be enough?
Choose color when the documents depend on color coding, charts, branding or visual instructions. Choose monochrome when your office mainly prints text and wants a simpler document workflow.
The Brother Monochrome Laser Printer is not a color printer, but it shows why paper handling should be evaluated separately from color output. See whether Brother makes a portable laser printer if you are comparing compact models.
It has Wi-Fi, automatic duplex printing, print, copy, scan and fax functions, plus a manual feed slot for papers such as cardstock and envelopes.

A useful comparison for offices that need wireless all-in-one functions, automatic duplex printing and flexible manual paper handling, but do not need color output.
See it on AmazonIts listed print speed is 32 pages per minute, and its maximum black-and-white copy speed is 30 pages per minute. The unit measures 15.7 in D x 16.1 in W x 12.5 in H and weighs 26 lb, so check the desk or cabinet before setup.
The printer uses TN730 or TN760 replacement cartridges. Amazon Dash Replenishment can measure toner level and order more when activated, while the Refresh EZ Print Subscription includes a free trial.
Use this model as a monochrome benchmark, not as a dual-tray color recommendation. Its manual feed slot may help with occasional special media, but it does not guarantee the same workflow as two dedicated paper trays.
Compare Brother laser printer deals for other models.
If your office needs a color model for a home workspace, compare our guide to the best color laser printer for home office. If you also need copying, scanning or faxing, compare color laser all-in-one printers.
How important are duplex printing and wireless access?
Automatic duplex printing helps reduce manual page turning for two-sided documents. Wireless access can make sharing easier when employees print from laptops, PCs or smartphones.
Check whether the printer supports the devices and operating systems used in your office. For a separate mobile scanning device, compare Bluetooth portable document scanners.
The Brother printer above lists Wi-Fi connectivity, USB hardware access, app control and compatibility with laptops, PCs and smartphones. See our guide to Bluetooth printers for home offices to compare another connection option.
For shared use, Wi-Fi can reduce cable clutter and let each device connect directly. That is helpful in a small office where the printer sits away from individual desks.
A USB link remains useful as a backup, for setup or for a device that should not rely on the network.
Duplex printing saves time on reports, contracts and training material. It also reduces the chance of pages being placed in the wrong order after manual flipping.
Check that both sides print cleanly on your usual paper weight before you depend on it.
Wireless access does not replace a good paper plan. A printer can connect easily and still create delays if users load the wrong stock, choose the wrong tray or leave special media in the wrong input.
Set up sharing with clear defaults. Give each tray a label, set the driver to the correct media type and tell staff which source to use for routine jobs.
This small step prevents most paper errors in a busy workspace.
Security and placement should be considered early. A shared printer may hold sensitive documents, so follow your office rules for network access and job release.
Keep the machine in a spot where staff can reach both trays and collect pages promptly.
If your main concern is a lower-cost color setup, read our guide to a color laser printer under 300 dollars. For shared offices that want fewer cables, compare best wireless color laser printers.
What office equipment should sit near the printer?
Place the printer near the supplies and finishing tools used with it. A shredder can support document cleanup, but it does not replace a second printer tray or improve paper selection.
The Fellowes Powershred 99Ci is a separate office machine for destroying documents after printing. If a sheet gets stuck, see how to clear a shredder paper jam.
It is a crosscut shredder that handles up to 18 sheets per pass and can process staples, credit cards, paper clips, CDs, DVDs and junk mail.

A practical companion for offices that print sensitive documents and need a separate crosscut shredder with an 18-sheet pass capacity and 9-gallon pull-out bin.
See it on AmazonIt creates 397 crosscut particles measuring 5/32 x 1-1/2 in and has a P-4 security grade. Its 9-gallon bin includes a LED full indicator, while SafeSense technology disables shredding when hands or paws touch the paper opening.
The shredder can run for up to 30 minutes before cooling and has a corded electric power source. It measures 17.31 in D x 11.44 in W x 25.19 in H and weighs 36.4 lb, so give it a stable location with room to pull out the bin.
Choose it for document disposal, not for printer paper handling. Keeping it near the printer can make the office workflow more complete, especially when printed documents contain confidential information.
For desk planning around multiple devices, our guide to What Is the Best Keyboard Tray for Dual Monitor Setups? covers another part of a shared workstation layout.
How should you set up and maintain two paper inputs?
Set up each tray with one clearly identified paper type. Adjust the paper guides so the stock sits flat without being squeezed, then select the matching size and media type in the printer settings.
Keep spare paper sealed and dry. Dust, curled sheets and mixed paper sizes can increase feed problems, especially when users refill trays quickly.
Use a short label on each tray, such as “Letter plain” or “Envelopes.” This makes the correct choice visible to every user and reduces accidental loading.
Check the printer's instructions before using cardstock, labels or envelopes. Special media may need a particular feed path, orientation or driver setting.
Clean the surrounding area and keep vents clear. A crowded shelf can make refilling harder and may prevent you from opening the trays fully.
Start by assigning each input a single job. Put your most common paper in the main tray and the second stock in the other tray.
Do not mix sizes in one tray, even for a short period, because guides and driver settings are set for one type at a time.
When you load paper, fan the stack lightly and check for curled or damp sheets. Place the stack squarely against the guides and move the guides in until they touch the paper without bending it.
Refit the tray slowly and confirm that it seats fully.
Labels should be simple and visible. A note such as “A4 plain” or “Cardstock manual” tells new users what belongs where.
Update the label if you change the stock, and remove old labels so no one follows outdated instructions.
For envelopes, cardstock and labels, follow the manual closely. Some media need a specific orientation, a rear exit path or a slower print setting.
Using the wrong path can cause jams or damage sheets, so test with a small batch first.
Store spare paper in a clean, dry place away from the printer. Keep the machine dusted and ensure air can move around the vents.
Good storage and clear access will make both trays easier to use and help prevent slow or unreliable feeding.
Is a color laser printer with dual trays worth it?
A dual-tray design is worth considering when your office changes between two paper stocks often enough to justify keeping both loaded. It is less useful when nearly every job uses the same plain paper.
Choose a printer with two standard trays for regular switching between paper sizes or stocks. Choose a main tray with a manual feed slot when special media is occasional and you want a smaller footprint.
Remember that the Brother Monochrome Laser Printer offers all-in-one functions, Wi-Fi, automatic duplex printing and manual paper handling, but it is not a color dual-tray model. The Fellowes Powershred 99Ci adds secure document disposal, not printing capacity.
For the related print technology decision, compare Laser vs Inkjet Printer for Your Home Office. The best color laser printer dual tray setup is the one whose paper inputs match your real weekly workflow, not simply the model with the most features.
Look at your last few weeks of printing. If staff constantly swapped paper, a second loaded tray could save time and reduce errors.
If special sheets appeared only a few times, a manual slot may be enough and easier to fit in the space available.
Consider who will use the printer. In a shared office, automatic tray selection and clear labels matter more than extra features no one will use.
In a home office, simpler loading and a smaller footprint may be more valuable than two full cassettes.
Weigh the trade-offs honestly. Two trays add convenience, but they also need room for access and storage for two paper types.
A single tray with a manual slot is less convenient for daily switching, yet it can handle occasional special media without taking as much space.
Check that the chosen model supports your devices and paper types. Confirm duplex use, media weights and tray selection before you buy, then set up each input with a clear label.
That practical match will matter more in daily use than a long feature list.
Frequently asked questions
What is a dual-tray color laser printer?
A dual-tray color laser printer has two paper input areas, usually allowing you to keep different paper sizes or stocks loaded at the same time. Confirm whether the model has two standard trays, a main tray plus a multipurpose tray, or only a manual feed slot before buying.
Why would an office need two printer trays?
Two trays help offices switch between everyday paper and a second stock without unloading the first tray. Common uses include letter paper plus envelopes, letter paper plus cardstock, or different paper sizes for separate workflows.
Is a manual feed slot the same as a second tray?
No. A manual feed slot handles individual sheets or small batches for special media, while a second tray is designed for a separate standing paper supply.
Check the printer's documented tray structure if automatic switching matters to your workflow.
Should I choose wireless printing for a shared office?
Wireless printing can help laptops, PCs and smartphones send jobs without a direct USB connection. Check the printer's supported devices, network setup and office security rules before relying on wireless access as your main connection.
About this guide: Our look at color laser printer with dual trays draws on maker specs, materials and what owners report. See how we research.



